Robert Swift
from
United Kingdom
asks
Does this fit the pre-millennium Europiccola? Thanks.
|
The Espresso Shop Replies:
|
Hi there, This item will not fit the Europiccola unless you change the Upper Sight Glass Retainer to the Professional size or if you can source/have someone manufacture an adapter nut to fit the Europiccola. These unfortunately are not supplied by La Pavoni. Thanks. The Espresso Shop Team.
|
james
from
United Kingdom
asks
Hi,
is the thread 12mm to fit a 1974 europicolla?
|
The Espresso Shop Replies:
|
No the pressure gauge is for the Pavoni Professional only and is 10mm
|
Danny
from
United States
asks
Will this pressure gauge or another adapt to a La Pavoni Europiccola (Pre-Millenium)? If so, do you have all the parts?
|
The Espresso Shop Replies:
|
Hi
To install a gauge on a Europiccola the parts used by a Professional need to be substituted. All parts can be found on the Pavoni Lever diagrams
Regards
|
Mark
from
UK - Mainland
asks
I read in another Q&A mention of adjusting the pressure gauge. Mine no longer drops back to zero (even when removed), is it possible to make it do so?
|
The Espresso Shop Replies:
|
Hi
Yes you can adjust by twisting the front off the gauge and carefully moving the needle back to where it is required
Regards
|
AC
from
India
asks
I have the latest model of the Europiccola (domestic), for which I'm looking to buy a pressure gauge -- is this the right one, and do I need to buy anything else with this (pipes, nuts etc)? Thanks!
|
The Espresso Shop Replies:
|
Hi AC
Yes the Europiccola is not designed to take a pressure gauge so to adapt it you need to change the Europiccola upper sight glass retainer with the Professional sight glass retainer https://www.theespressoshop.co.uk/en/La-Pavoni-Lever-Upper-Sight-Glass-Retainer-for-gauge---31111441/m-2268.aspx and also. Along with the pressure gauge you will also need the pressure gauge nut https://www.theespressoshop.co.uk/en/La-Pavoni-Professional-Pressure-Gauge-Nut-Chrome---3120104/m-2238.aspx. As you will also be removing the element to access the sight glass retainer the element gasket will also need to be replaced.
Kind regards
|
Marco
from
United States
asks
Will this fit the Stradivari Lusso V120 STL12?
|
The Espresso Shop Replies:
|
Hi Marco
The Stradivari STL does not have a gauge and one cannot be installed
Regards
|
bree
from
Australia
asks
Is there also a pressure gauge to measure 9 to 10 bars of pressure during the pull. This gauge seems to measure steam pressure only (to a maximum of 2.5 bar) or am I mistaken?
|
The Espresso Shop Replies:
|
Hi Bree
Can be found here https://www.theespressoshop.co.uk/en/La-Pavoni-Lever-Piston-Shaft-Pressure-Gauge-0-16-Bar---5530014/m-4462.aspx
Regards
|
Free 
Service 
