Home PagePressure Gauges, Switches & PartsLa Pavoni Lever Pressure Switch 0.5-1.2 Bar - 451308Reviews |
|
Anonymous from FranceOwner23 November 2016 21:56
It was easily installed as a replacement to the old glued in model which I thought was set at too high a level (1.2 bar), conform to the old norms. Following the sales support advise, the replacement one was adjusted to 0.8 by turning the screw counter-clockwise. Easily done, and now it's a perfect espresso !
51 People out of 145 Found this review useful.
Nicholas from United StatesOwner02 December 2016 15:28
Perfect to restore my 15 year old La Pavoni to as new condition. It is a different (and better) design to the original. Thank You Espresso Shop for great products, prices, service and a seamless international transaction.
43 People out of 132 Found this review useful.
Mark from United KingdomOwner19 January 2017 10:30
Good service, item as described and arrived on time. Sorted my pavoni out.
34 People out of 104 Found this review useful.
Steve from United KingdomOwner16 February 2017 10:44
Quality part.
36 People out of 104 Found this review useful.
Matt from UK - MainlandOwner01 March 2018 18:06
Nice little component easy to install and fixed my gaggia factory lever machine.
21 People out of 70 Found this review useful.
Dominic from CanadaOwner18 December 2019 22:26
Easy installation and works as it should. Factory setting was a bit low at .5 bar. Was easy to adjust to .8 bar. Just needed a 1/2 turn clockwise.
7 People out of 37 Found this review useful.
Robert from UK - MainlandOwner15 May 2021 17:07
Replacement on my 18 year old machine, very easy too fit and works perfectly.
4 People out of 28 Found this review useful.
Robert from AustraliaOwner02 March 2023 13:39
The replacement pressure switch I purchased was different in appearance to the original in my 1997 Europiccola but I was assured by the Espresso Shop that it would function correctly and indeed it did. Swiftly shipped and simple to install. Thank you.
4 People out of 7 Found this review useful.
Anonymous from UK - Mainland10 May 2023 17:46
Easy to fit. Solved the problem which I initially thought was the pressure valve but is actually this unit regulating the temperature.
3 People out of 5 Found this review useful.
Andrew from UK - MainlandOwner20 May 2023 12:15
My la pavonia professional stopped heating up. The seals to the sight glass had gone. I replaced the thermo first but it turns out it was the pressure switch. Simple to replace. Works great after I replaced the seals, thermostat and pressure switch.
2 People out of 5 Found this review useful.
FAZONE from Korea Republic ofOwner15 February 2024 01:09
This part arrived in good order. When I went to replace it today, my Rapavoni machine was working normally.^^ I'm trying to keep it in good condition as parts. |